Material

Round cold drawn free-cutting steel, with lead 11SMnPb30/37+C/SH/SL (9SMnP28/36K), tol. h6

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Round cold drawn free-cutting steel, with sulphur 11SMn30 +C/SH Tol. h9

Round cold drawn case hardening steel C15Pb+C (C15PbK) Tol. h9

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Cold drawn heat treatable steel, with lead C45Pb+C (C45PbK) Tol. h9

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Hard chromium plated steel bars, according to C45E / C45 / Ck 45, tol. f7/f8 (limited weldable)

Cold drawn case hardening steel, 16MnCrS5+A+C/SH, Tol. h9

Round bars, 100Cr6+AC+C/SH, cold drawn h9

grinded shafts Cf53 (Mat. 1.1213), h6, inductive hardened in production-lengths

Cold drawn high strength steel, ETG 100

Tolerances: 6.00 mm to 64.00 mm h11 from 64.00 mm to 70.80 mm h12

Cold drawn high strength steel, ETG 100+SL, tol h6, grinded

Brass round bars, CuZn39Pb3/CW614N (Ms58), drawn, acc. EN 12164

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

round bar hot rolled, S235JR

Stainless steel round bar, MatNr. 1.4301, drawn h9

Hard chromed piston rods made of stainless steel, Tol. f7, 1.4301 in fabrication lengths chrome layer thickness: diameter <= 18 mm: >= 14 my diameter >= 20 mm: >= 20 my tolerance: diameter <= 16 mm: ISO f8 diameter >= 18 mm: ISO f7

Stainless steel round bar, MatNr. 1.4404, drawn h9

Stainless steel round bar, MatNr. 1.4305, drawn h9

Stainless steel round bar, MatNr. 1.4305, grinded h9

Stainless steel round bar, MatNr. 1.4305, grinded h8

Threaded rods at 2 m, quality 4.6/4.8, galvanised-blue

Threaded rods at 1 m, quality 8.8, bright

Threaded rods at 1 m, quality 8.8, galvanised-blue

Threaded rods at 1 m, INOX A2

Threaded rods at 1 m, brass, bright

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Caro bronze round CuSn8P DIN EN 12163

Silver steel, 1.2210/115CrV3, DIN175, tol. h8 in productionlenghts of 2 m

Brass round bars, CuZn39Pb3/CW614N (Ms58), drawn h9, acc. EN 12164

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Permaglide P10/P14 Cylindrical bushing

Permaglide P11 Cylindrical bushing

Permaglide P10/P14 Cylindrical bushing

Permaglide P10/P14 Cylindrical bushing

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless steel tubes (HPL), St 37.4, DIN 2391/C, DIN 1630, NBK or EN 10305-4, E 235 + N, oiled

Cylindrical bearing, Métafram BP 25

Cylindrical bearing, Métafram BP 25

Cylindrical bearing, Métafram BP 25

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

cold drawn round steel, S235JRC+C

cold drawn round steel, C45+C

Round cold drawn free-cutting steel, with lead 11SMnPb30/37+C/SH (9SMnP28/36K) Tol. h9

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Round cold drawn free-cutting steel, with lead 11SMnPb30/37+C/SH/SL (9SMnP28/36K), tol. h6

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Round cold drawn free-cutting steel, with sulphur 11SMn30 +C/SH Tol. h9

Brass round bars, CuZn39Pb3/CW614N (Ms58), drawn h9, acc. EN 12164

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Round bar décolletage 1.4112 AISI 440B grinded h7 EN 10088-3 – EN10277 – UNI EN 10308 – ASTM A276 "excluding Mo-content" Surface condition 2H EN 10088/3 Cl.3 EN 10277/1 Out of roundness max.: ½ diameter tolerance cold drawn, ground, polished, Ra max. 0.4 µm (N5) EN 10278 0.50 mm/m max Crack test (Eddy current) - EN 10277/1 Cl. 3 in lengths of 3 m -0/+100 mm

Wotan Bronze AKS 59 round CuAl9Fe4Ni1

Caro bronze round CuSn8P DIN EN 12163

Round bar décolletage 1.4435 AISI 316L grinded h7 EN 10088-3 – EN 10277 – UNI EN 10308 – ASTM A276 – ASTMA 479 Surface condition 2H EN 10088/3 Cl.3 EN 10277/1 Out of roundness max.: ½ diameter tolerance cold drawn, ground, polished, Ra max. 0.4 µm (N5) EN 10278 0.50 mm/m max Crack test (Eddy current) - EN 10277/1 Cl. 3 in lengths of 3 m -0/+100 mm

Silver steel, 1.2210/115CrV3, DIN175, tol. h8 in productionlenghts of 2 m

Round cold drawn free-cutting steel, with lead 11SMnPb30/37+C/SH (9SMnP28/36K) Tol. h9

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Permaglide P10/P14 Flanged bushing

Flanged bearing C, Métafram FP 20

Cylindrical bearing, Métafram FP 20

Permaglide P10/P14 Cylindrical bushing

Permaglide P11 Cylindrical bushing

Permaglide P10/P14 Flanged bushing

Permaglide P10/P14 Cylindrical bushing

Permaglide P10/P14 Flanged bushing

Permaglide P11 Flanged bushing

Cylindrical bearing, Métafram FP 20

Flanged bearing C, Métafram FP 20

Permaglide P10/P14 Cylindrical bushing

Cylindrical bearing, Métafram FP 20

Flanged bearing C, Métafram FP 20

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless steel tubes (HPL), St 37.4, DIN 2391/C, DIN 1630, NBK or EN 10305-4, E 235 + N, oiled

Cold drawn seamless steel tubes (HPL), St 37.4, DIN 2391/C, DIN 1630, NBK or EN 10305-4, E 235 + N, bonderized

Seamless hydraulic line tubes E235 N EN 10305-4, galvanised and passivated, free of chromium 6 on the outside, oiled on the inside

Seamless steel tubes, acid resistant, EN 10216-5, MatNr. 1.4404, drawn, bright annealed or annealed and pickled, tolerances DIN EN 10305-1, production lenghts approx. 6 m

Seamless steel tubes, acid resistant, EN 10216-5, MatNr. 1.4571, drawn, bright annealed or annealed and pickled, tolerances DIN EN 10305-1, production lenghts approx. 6 m

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless steel tubes (HPL), St 37.4, DIN 2391/C, DIN 1630, NBK or EN 10305-4, E 235 + N, oiled

Seamless hydraulic line tubes E235 N EN 10305-4, galvanised and passivated, free of chromium 6 on the outside, oiled on the inside

Cylindrical bearing, Métafram BP 25