C Steel

Round cold drawn free-cutting steel, with lead 11SMnPb30/37+C/SH (9SMnP28/36K) Tol. h9

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Round cold drawn free-cutting steel, with sulphur 11SMn30 +C/SH Tol. h9

Hard chromium plated steel bars, according to Ck 45, tol. f7/f8 (limited weldable)

alloyed heat treatment steel, round, hot-rolled, 51CrV4+A/+QT, grd. 1.8159 after EN ISO 683-2 (EN 10083-3) / tolerances EN 10060

Hard chromium plated steel bars, quality 42CrMo4+QT, Tol. f7

Nickel and chrome plated piston rods, base material 20MnV6, nickel layer thickness min. 30My, chrome layer thickness min 25My, tol. f7/f8

Hard chromium plated steel bars, inductiv hardened, 42CrMo4+QT, Tol. f7

Hard chromium plated steel bars, inductiv hardened, C45/C50 / CK45/ 38MnVS6, tol. f7

Hard chromium plated steel bars, quality 20 Mn V6, Tol. f7

cold drawn round steel, 42CrMoS4+QT+C/SH (1.7225 / 1.7227), tol. h9

case hardened steel, round, hot-rolled, C15E, grd. 1.1141, after EN ISO 683-3 (EN 10084) / tolerances EN 10060

case hardened steel, round, hot-rolled, 15NiCr13+A, Wst 1.5752, after EN ISO 683-3 (EN 10084) / tolerances EN 10060

case hardened steel, round, hot-rolled, 18CrNiMo7-6+A (partially +FP), grd. 1.6587 after EN ISO 683-3 (EN 10084) / tolerances EN 10060

case hardened steel, round, hot-rolled, 16MnCr(S)5 (partially +A), grd. 1.7131/1.7139 after EN ISO 683-3 (EN 10084), tolerances EN 10060

Cold drawn high strength steel, ETG 100

Tolerances: 6.00 mm to 64.00 mm h11 from 64.00 mm to 70.80 mm h12

nitrided steel, round, hot-rolled, 31CrMoV9+QT, grd. 1.8519 after EN 10085 / tolerances EN 10060

nitrided steel, round, hot-rolled, 34CrAlNi7-10+QT, grd. 1.855 after EN 10085 / tolerances EN 10060

Anti-frictionbearing steel, round, hot-rolled, 100Cr6+AC, grd. 1.3505 after EN 683-17 / tolerances EN 10060

heat resistantpressure-vessel steelroundhot-rolled, 16Mo3, grd. 1.5415 after EN 10273, tolerances after EN 10060

structural steel, round, hot-rolled, S355J2, EN 10025-2, tolerances EN 10060

structural steel, round, hot-rolled, S355J2+N, after EN 10025-2 / tolerances EN 10060

Cold drawn high strength steel, ETG 100

Tolerances: 6.00 mm to 64.00 mm h11 from 64.00 mm to 70.80 mm h12

Kaltarbeitstahl, Wst 1.2379, X153CrMoV12

Kaltarbeitstahl, 1.2842, geglüht

Warmarbeitsstahl, Wst 1.2343

Kunststoffformenstahl, Wst. 1.2312

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn cylinder tubes, St 52 / 52.2 or accordingly E355, stressrelieved / roller burnished, bore tolerance H8 / H9, bore surface finish 0.4 my Ra

Hot rolled seamless heavy wall tubes, EN 10297-1, E355, or DIN 2448/1629, St 52.0 (partially DIN EN 10210-1, S355J2H)

Hot rolled seamless heavy wall tubes, EN 10297-1, E355, or DIN 2448/1629, St 52.0 (partially DIN EN 10210-1, S355J2H)

Hot rolled seamless heavy wall tubes, EN 10297-1, E355, or DIN 2448/1629, St 52.0 (partially DIN EN 10210-1, S355J2H)

Hot rolled seamless heavy wall tubes, EN 10297-1, E355, or DIN 2448/1629, St 52.0 (partially DIN EN 10210-1, S355J2H)

Cold drawn high strength steel, ETG 88

Tolerances: from 20.50 mm to 64.00 mm h11 from 65.00 mm to 114.30 mm h12

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cylinder tubes, welded and cold drawn, St 52-3 or E 355, bore tolerance H 10, bore surface finish max. 1 my Ra

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn cylinder tubes, St 52 / 52.2 or accordingly E355, stressrelieved / roller burnished, bore tolerance H8 / H9, bore surface finish 0.4 my Ra

Cold drawm seamless precision steel tubes, EN 10305-1, E355 + SR, oiled

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn cylinder tubes, St 52 / 52.2 or accordingly E355, stressrelieved / roller burnished, bore tolerance H8 / H9, bore surface finish 0.4 my Ra

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn cylinder tubes, St 52 / 52.2 or accordingly E355, stressrelieved / roller burnished, bore tolerance H8 / H9, bore surface finish 0.4 my Ra

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Seamless hollow bars for machining EN 10294-1, E470

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn cylinder tubes, St 52 / 52.2 or accordingly E355, stressrelieved / roller burnished, bore tolerance H8 / H9, bore surface finish 0.4 my Ra

Seamless hollow bars for machining EN 10294-1, E470

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Tubes bored from solid bars, in S355J0, S355J2 or S355J2G3 according to EN 10025, bars may have bezel position

unalloyed heat treatment steel, round, hot-rolled, C45E, grd. 1.1191 after EN ISO 683-1 (EN 10083-2), tolerances after EN 10060

unalloyed heat treatment steel, round, hot-rolled, C60E, grd. 1.1221 after EN ISO 683-1 (EN 10083-2), tolerances after EN 10060

Alloyed heat-treated steel, round, hot-rolled, 30CrNiMo8+QT, Wst 1.6580 according to EN ISO 683-2 (EN 10083-3) / tolerances EN 10060

cold drawn round steel, S355J2C+C, tol. h9

alloyedheat treatment steel round hot-rolled, 34CrNiMo6+QT, grd. 1.6582 after EN ISO 683-2 (EN 10083-3), tolerances after EN 10060

cold drawn round steel, C45+C

alloyed heat treatment steel, round, hot-rolled, 25CrMo(S)4+QT, grd. 1.7213 / 1.7218 after EN ISO 683-2 (EN 10083-3), tolerances after EN 10060

cold drawn round steel, C45+C+SL, grinded

alloyed heat treatment steel, round, hot-rolled, 42CrMo(S)4+QT, grd. 1.7225/1.7227 after EN ISO 683-2 (EN 10083-3), tolerances after EN 10060

Round cold drawn free-cutting steel, with lead 11SMnPb30/37+C/SH (9SMnP28/36K) Tol. h9

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)